ESP32-C6 SuperMini Development Board, Wi-Fi 6, Bluetooth 5, Zigbee/Thread
₵90.00
A thumb-sized ESP32-C6 development board with Wi-Fi 6, Bluetooth LE 5, and Zigbee/Thread (802.15.4) support built in. It has a 160MHz RISC-V processor, 4MB flash and a USB-C port for programming, and it fits easily into wearables, smart home sensors and other small IoT projects.
4 in stock
🚚 Same-day delivery in Kumasi · Next-day nationwide
💳 Pay with MoMo, VISA or bank transfer
The ESP32-C6 SuperMini packs Espressif’s newest low-power wireless chip onto a board about the size of a postage stamp. The ESP32-C6 is the first ESP32 with Wi-Fi 6 (802.11ax), which connects more reliably and uses less power on busy networks. It also has an IEEE 802.15.4 radio, so the same board can join Zigbee, Thread and Matter smart home networks.
The board has a native USB-C port, so you can program it straight from the Arduino IDE, ESP-IDF or MicroPython without a separate USB-to-serial chip. BOOT and RESET buttons are on the board, and the pins fit a breadboard. It’s a good choice when space is tight but you still need strong wireless features.
Key Features
- ESP32-C6 chip. It has a 160MHz high-performance RISC-V core and a separate low-power RISC-V core.
- Wi-Fi 6 (802.11ax), 2.4GHz. It uses less power and handles crowded networks better than older Wi-Fi.
- Bluetooth LE 5. Use it for BLE sensors, beacons and phone apps.
- Zigbee 3.0 and Thread (802.15.4). It’s ready for Matter smart home devices.
- 4MB flash. There’s room for larger programs and over-the-air (OTA) updates.
- Native USB-C. You program and debug over USB, with no extra driver chip.
- Very small SuperMini size. It’s ideal for wearables and compact enclosures.
- Low-power sleep modes. It’s well suited to battery-powered sensors.
- Rich peripherals. It has UART, SPI, I2C, PWM and a 12-bit ADC.
Specifications
| Parameter | Value |
|---|---|
| Chip | ESP32-C6 |
| CPU | 32-bit RISC-V, up to 160MHz, plus a 20MHz low-power core |
| SRAM | 512KB |
| Flash | 4MB |
| Wi-Fi | 802.11 b/g/n/ax (Wi-Fi 6), 2.4GHz |
| Bluetooth | Bluetooth LE 5 |
| 802.15.4 | Zigbee 3.0 / Thread (Matter-ready) |
| Interfaces | UART, SPI, I2C, PWM, ADC |
| USB | USB Type-C (native USB Serial/JTAG) |
| Input voltage | 5V via USB-C, or 3.3V on the 3V3 pin |
| Logic level | 3.3V (not 5V tolerant) |
| Buttons | BOOT, RESET |
| Antenna | Onboard ceramic antenna |
| Size | Approx. 22.5 × 18mm |
Programming
Arduino IDE:
- Install the esp32 by Espressif Systems board package (version 3.0 or later) from the Boards Manager.
- Choose ESP32C6 Dev Module.
- Set USB CDC On Boot to Enabled so the Serial Monitor shows output over USB-C.
Also supported: ESP-IDF, MicroPython and PlatformIO.
Upload tip: If the board isn’t detected, hold BOOT, press and release RESET, then release BOOT to enter download mode.
Applications
- Matter, Zigbee and Thread smart home devices
- Wi-Fi 6 IoT sensors and data loggers
- Battery-powered wireless sensor nodes
- BLE wearables and trackers
- Smart switches, plugs and lighting controllers
- Compact robotics and remote-control projects
Package Includes
- 1 × ESP32-C6 SuperMini Development Board
- Header pins (may come unsoldered)
Be the first to review “ESP32-C6 SuperMini Development Board, Wi-Fi 6, Bluetooth 5, Zigbee/Thread”
Related products
Reviews
There are no reviews yet.