The DHT22 (AM2302) is a digital sensor that measures both temperature and relative humidity and sends the readings over a single data wire. It is more accurate and has a wider range than the DHT11, which makes it a good choice for weather stations, greenhouses, incubators, server rooms and smart home projects.
Specifications
- Temperature range: −40°C to 80°C (±0.5°C)
- Humidity range: 0–100% RH (±2–5% RH)
- Supply voltage: 3.3V to 5V
- Output: single-wire digital signal
- Reading rate: one reading every 2 seconds
Works with
Arduino Uno, Nano and Mega, ESP32, ESP8266 and Raspberry Pi. Use the free DHT sensor library for Arduino to get readings in a few lines of code.
Pins
VCC (power), DATA (signal) and GND. If your sensor is the bare 4-pin version, add a 10kΩ pull-up resistor between VCC and DATA.










Reviews
There are no reviews yet.